Đồng hồ vạn năng Fluke 113

Fluke 113 Multimeter

    Fluke 113 Multimeter

    • VCHEK up to 600V
    • 2V diode test
    • Continuity detects opens or shorts of 500μs or longer
    • Impedance up to 60kΩ
    • Capacitance up to 9999μF
    Hãng sản xuất:

      Fluke 113 True RMS Utility Multimeter with VCHECK™

      The Fluke 113 multimeter gives utility users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features necessary to repair most electrical problems. Using the Fluke VCHEK LoZ low impedance measurement function, users can simultaneously test for voltage or continuity.

      An easy-to-use True RMS utility meter, which enables users to quickly and easily perform basic meter set and reconnect testing and possesses the features you need to repair most electrical problems. Additionally, it features VCHEK™ LoZ low impedance measurement function, which lets users simultaneously test voltage or continuity.

      Features

      • VCHEK up to 600V
      • 2V diode test
      • Continuity detects opens or shorts of 500μs or longer
      • Impedance up to 60kΩ
      • Capacitance up to 9999μF
      • Auto and manual ranging capabilities
      • CAT III 600V and CAT IV 300V
      • VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
      • True RMS for accurate AC measurements on non-linear loads
      • A large backlit display allows for easy visibility in low-lit areas
      • Record signal fluctuations using the Min/Max function
      • Diode test for testing general-purpose germanium, silicon, and power diodes
      • Integral holster with probe holders for easy storage
      • Auto and Manual ranging for added user functionality
      • Meets measurement category CAT IV 600 V and Category IV 300 V standards for a higher level of safety
      • The optional TPAK magnetic hanger allows the user hands-free flexibility (sold separately)

      What’s in the Box

      • TL75 test leads
      • Holster
      • Users manual
      • 9V battery (installed)

      Specifications

      Fluke 113 Specifications

      VCHEK
      Range6, 60, 600 V
      Resolution0.001, 0.01, 0.1 V
      AccuracyDC, 45 to 500 Hz: 2.0% + 3
      500 Hz to 1 kHz: 4.0% + 3
      Diode Test
      Range2 V
      Resolution0.001 V
      Accuracy2.0% + 3
      Continuity
      AccuracyBeeper on <20 Ω, off >250 Ω detects opens or shorts of 500 µs or longer
      Ω
      Range600 Ω, 6, 60 kΩ
      Resolution0.1 Ω, 0.001, 0.01 kΩ
      Accuracy0.9% + 2
      0.9% + 1
      0.9% + 1
      Capacitance
      Range1000 nF, 10, 100, 9999 µF
      Resolution1 nF, 0.01 µF, 0.1 µF, 1µF
      Accuracy1.9% + 2
      100 to 1000 µF: 1.9% + 2
      1000 µF: 5% + 20
      General Specifications
      Maximum Voltage Between Any Terminal and Earth Ground600 V
      Display3¾-digits, 6000 counts, updates 4/sec
      Operating Temperature14 to 122°F (-10 to 50°C)
      Storage Temperature-22 to 140°F (-40 to 60°C)
      Temperature Coefficient0.1 x (specified accuracy)/°C (<18 or >28°C)
      Operating Altitude6561.7′ (2000 m)
      Storage Altitude32808.4′ (10,000 m)
      Relative Humidity95% to 86°F (30°C)
      75% to 104°F (40°C)
      45% to 122°F (50°C)
      Battery Type9 V Alkaline, ANSI 1604A/IEC 6F22
      Battery LifeAlkaline: 300 hours typical, without backlight
      Shock3.3′ (1 m) drop per IEC 61010–1–2001
      VibrationPer MIL-PRF-28800 for Class 2 instrument
      Dimensions6.58 x 33.5 x 1.81″ (167.1 x 85.1 x 46 mm)
      Weight13.0 oz (404 g)
      SafetyComplies with ANSI / ISA 82.02.01 (61010–1) 2004, CAN / CSA-C22.2 No 61010-1-04, UL 61010–1 (2004) and IEC / EN 61010–1 2nd Edition for measurement Category IV, 600 V, Pollution Degree 2, EMC EN61326–1
      EMI RegulationsComplies with FCC Part 15, Class B