Máy đo điện trở cách điện Fluke 1587 FC

Fluke 1587 FC Insulation Multimeter

    Fluke 1587 FC Insulation Multimeter

    Digital insulation tester for 50, 100, 250, 500 and 1000V combined with a True RMS digital multimeter.

    • AC/DC voltage (up to 1000V) & current (up to 400mA)
    • 0.01MΩ to 2GΩ insulation test
      • Smoothing mode dampens display fluctuations
    • 0.1Ω to 50MΩ resistance
    • Frequency measurement up to 99.99kHz
    • Up to 9999μF capacitance
    Hãng sản xuất:

      Fluke 1587 FC Insulation Multimeter

      The Fluke 1587 FC insulation multimeters combine a digital insulation tester with a full-featured, True RMS digital multimeter in a single compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

      The 1587 FC has a large, 6000 count display with backlight. It measures AC/DC voltage, DC millivolts, AC/DC milliamps, resistance, continuity, capacitance, diode test, temperature, Min/Max, and frequency.

      For added user protection it has live circuit detection which prevents an insulation test if voltage greater than 30V is detected, as well as an auto-discharge of capacitive voltage.

      The new Fluke Connect measurement app adds some valuable diagnostic functions:

      • PI/DAR timed ratio tests with TrendIt graphs identifies moisture and contaminated insulation problems faster
      • Memory storage through Fluke Connect eliminates writing down results, reduces errors and saves data for historical tracking over time
      • Temperature Compensation through app for establishing accurate baselines and relevant historical comparisons
      • Historical tracking and trending of assets identifies degradation over time, allows real-time decisions to be made in the field

      Features

      • AC/DC voltage (up to 1000V) & current (up to 400mA)
      • 0.01MΩ to 2GΩ insulation test
        • Smoothing mode dampens display fluctuations
      • 0.1Ω to 50MΩ resistance
      • Frequency measurement up to 99.99kHz
      • Up to 9999μF capacitance
      • Diode and continuity tests
      • -40 to 998°F (-40 to 537°C) temperature range
      • Filter for motor drive measurements
      • CAT III 1000V, CAT IV 600V measurement category
      • PI/DAR timed ratio tests (1587 FC only)
      • Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
      • VFD low-pass filter for accurate motor drive measurements (1587 FC only)
      • Filter for motor drive measurements
      • Insulation test (0.01MΩ to 2GΩ)
      • Insulation test voltages (50 V, 100 V, 250 V, 500 V, 1000 V) for many applications

      What’s in the Box

      • Remote probe
      • Test leads
      • Alligator clips
      • K-type thermocouple
      • Hard case
      • User resources

      Specifications

      Fluke 1587 FC Specifications

      Specifications
      Voltage DC
      Maximum Voltage1000 V
      Accuracy±(0.09%+2))
      Maximum Resolution0.001V
      Voltage AC
      Maximum Voltage1000 V
      Accuracy±(2%+3)
      AC Bandwidth5kHz*
      *with low pass filter; 3db @ 800 Hz
      Maximum Resolution0.1 mV
      Current DC
      Maximum Amps400mA
      Amps Accuracy±(0.2%+2)
      Maximum Resolution0.01 mA
      Current AC
      Maximum Amps400mA
      Amps Accuracy

      1587: ±(1.5%+2)** 1kHz bandwidth
      Maximum Resolution0.01 mA
      Resistance
      Maximum Resistance50 MΩ
      Accuracy±(0.9%+2)
      Maximum Resolution0.1Ω
      Capacitance
      Maximum Capacitance9,999 µF
      Accuracy±(1.2%+2)
      Maximum Resolution1 nF
      Frequency
      Maximum Frequency100 kHz
      Accuracy±(0.1%+1)
      Maximum Resolution0.01 Hz
      Temperature Measurement
      -40.0 °C to 537 °C
      -40.0 °F to 998 °F
      excluding probe
      Diode Test
      Range6 V
      Resolution1 mV
      Accuracy±(2 % + 1)

      Insulation Test
      Minimum Test Current @ 1kΩ/V
      1mA
      Test Voltages
      50, 100, 250, 500, 1000 V
      Maximum Resistance per Test Voltage
      50V
      100V
      250V
      500V
      1000V2 GΩ
      Maximum Resolution per Test Voltage
      50V0.01 MΩ
      100V0.01 MΩ
      250V0.1 MΩ
      500V0.1 MΩ
      1000V0.1 MΩ
      Accuracy per Test Voltage
      50V±(3 % + 5)
      100V±(3 % + 5)
      250V±(1.5 % + 5)
      500V±(1.5 % + 5)
      1000V±(1.5 % + 5) to 600 MΩ, ±(10 % + 3) above 600 MΩ

       

      Environmental Specifications
      Operating temperature
      -20 °C to +55 °C
      Storage temperature
      -40°C to +60°C
      Humidity (Without Condensation)
      0% – 95% (10 °C – 30 °C)
      0% – 75% (30 °C – 40 °C)
      0% – 40% (40 °C – 55 °C)
      Operating Altitude
      2000 m

       

      Safety Specifications
      Overvoltage category
      Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V
      Agency Approvals
      2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V

       

      Mechanical & General Specifications
      Size
      203 x 100 x 50 mm (with holster)
      Weight
      624 g
      Warranty
      3 years
      Battery life Alkaline
      Meter use1000 hours
      Insulation test useMeter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
      IP Rating
      IP40