Fluke 190-504/UN ScopeMeter Test Tool, 500MHz, 4 Channel

    Fluke 190-504/UN ScopeMeter Test Tool, 500MHz, 4 Channel

    • Four electrically isolated inputs
    • CAT III 1000 V / CAT IV 600 V safety rated
    • Fast sampling rate, up to 5 GS/s with up to 200 ps resolution
    • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
    • Dedicated 999 Count digital multimeter
    Mã: Fluke 190-504/UN Hãng sản xuất:

      Fluke 190-504/UN ScopeMeter Test Tool, 500MHz, 4 Channel

      This scopemeter delivers greater accuracy and clarity. Ideal test tool for plant maintenance engineers and technicians, designed to withstand harsh, dirty, and hazardous industrial conditions.

      The scope will capture and display unknown waveform shapes, amplitudes and any disturbances. In order to display at least the fifth harmonic component of a signal, a good rule of thumb is to select a scope with a bandwidth of at least five times the maximum clock rate of the device under test. The faster the sample interval, the more accurate and detailed the scope will display a signal edge (dV/dt) and peaks of any reflections or transients.

      Features

      • Four electrically isolated inputs
      • CAT III 1000 V / CAT IV 600 V safety rated
      • Fast sampling rate, up to 5 GS/s with up to 200 ps resolution
      • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
      • Dedicated 999 Count digital multimeter
      • Four meter measurements via scope BNC inputs in four-channel models
      • Connect-and-View™ continuous auto-trigger, single shot, pulse width, and video triggering
      • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
      • TrendPlot, trend measurement readings for up to 22 days
      • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
      • IP-51 rated for dust and drip proof to withstand harsh environments
      • Isolated USB ports for memory devices and PC connectivity
      • Li-Ion battery for extended operating timespan
      • Easy-access battery door to make it easy to swap batteries
      • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock

      Specifications

      Fluke 190-504/UN Specifications

      Bandwidth500 MHz
      Number of Channels4
      Real-Time Sample Rate5 GS/s
      Inputs4 x BNc input scope plus DMM input
      Independently Floating Isolated InputsUp to 1000 V CAT III/600 V CAT IV between inputs, references and ground
      Input Sensitivity2 mV-100 V/div plus variable attenuation
      Trigger TypesConnect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle
      Trigger Source4 x BNC input
      Glitch Capture8 ns
      Maximum Record LengthScopeRecord Mode: 30,000 pts per input
      Scope Mode: 10,000 pts per input
      PersistenceDigital persistence giving analog oscilloscope-like waveform decay
      Waveform CompareWaveform reference with automatic pass/fail testing