Fluke 324 True RMS Clamp Meter

The Fluke 324 True RMS Clamp Meter is designed to perform in the toughest environments and provide noise-free, reliable results users can trust to confidently diagnose problems. True-rms measurements and optimized ergonomics make the 324 Clamp Meter the best general troubleshooting tool for commercial and residential electricians.

True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The 323, 324 and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke 324 model also includes temperature and capacitance measurement capabilities.Measurement capability

400 A ac current measurement
600 V ac and dc voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
Resistance measurement up to 40 kΩ with continuity detection
Temperature and capacitance measurement

Features

400 A ac current measurement
600 V ac and dc voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
Resistance measurement to up to 40 kΩ with continuity detection
Temperature and capacitance measurement
Slim, ergonomic design
Large, easy to read backlight display
CAT IV 300 V/CAT III 600 V safety rating
Hold button
Slim, ergonomic design
Large, easy to read backlight display
CAT IV 300V/CAT III 600 V safety rating
Hold button
Two-year warranty
Soft carrying case

Ships complete with:

324 True-rms Clamp Meter
Test leads
Soft case
User manual

Specifications

Fluke 324 Specifications

AC Current
Range	40.00/400.0 A
Accuracy	1.5% ± 5 digits (45 to 400 Hz) Note: Add 2% for position sensitivity
AC Voltage
Range	600.0 V
Accuracy	1.5% ± 5 digits
DC Voltage
Range	600.0 V
Accuracy	1.0% ± 5 digits
Resistance
Range	400.0/4000 Ω
Accuracy	1.0% ± 5 digits
General Specifications
Continuity	≤30 Ω
Capacitance	100.0 to 1000 µF
AC Response	True RMS
Backlight	Yes
Data Hold	Yes
Contact Temperature	14 to 752°F (-10 to 400°C)
Maximum Wire Diameter	1.2″ (30 mm) 600 MCM
Dimensions	8.15 x 2.95 x 1.33″ (207 x 75 x 34 mm)
Weight	0.46 lb (208 g)
Category Rating	CAT III 600 V CAT IV 300 V

Fluke 324 True RMS Clamp Meter