Nhiệt kế hồng ngoại Fluke 62 MAX+

Fluke 62 MAX Infrared Thermometer

    Fluke 62 MAX Infrared Thermometer

    -22 to 932°F, 10:1 (D:S), ±1.5% accuracy, lightweight, rugged, dust & water resistant with adjustable emissivity.

    • -22 to 932°F (-30 to 500°C) temp range
    • 10:1 optical resolution
    • ±1.5°C or ±1.5 % of reading accuracy
    • Lightweight; clips to tool belt
    • Adjustable emissivity
    • Single laser point targeting
    Hãng sản xuất:

      Fluke 62 MAX Infrared Thermometer

      The Fluke 62 MAX Infrared Thermometer is everything you’d expect from the experts in measurement tools: small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX+ are so tough, they’re the only IR thermometers around you can handle without care.

      Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hardto-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.

      Features

      • -22 to 932°F (-30 to 500°C) temp range
      • 10:1 optical resolution
      • ±1.5°C or ±1.5 % of reading accuracy
      • Lightweight; clips to tool belt
      • Adjustable emissivity
      • Single laser point targeting
      • Large backlit display
      • Min/Max/Avg/Dif
      • 1 x AA battery
      • 3 meter drop tested
      • IP54
      • Provides a 10:1 Distance to spot ratio
      • Offers single laser targeting for accurate and repeatable measurements
      • IP54 rating against dust and moisture
      • High and low alarms for rapid detection of temperatures outside the limits
      • Powered by a single, standard AA battery
      • Withstands a 9.8′ (3 m) drop
      • Small, lightweight form factor to clip comfortably to your tool belt or belt loop, or easily fit in your tool box
      • A large, backlit display to make data easier to read, even in dark areas
      • Displays Min/Max/Avg/Dif: the minimum, maximum or average temperature, or the difference between two measurements

      Applications

      • Non-contact temperature

      What’s included with the Fluke 62 MAX

      • Thermometer
      • Instruction Sheet

      Specifications

      Fluke 62 MAX Specifications

      Temperature Range-22 to 932°F (-30 to 500°C)
      Accuracy±34.7°F (±1.5°C) or ±1.5% of reading, whichever is greater
      14 to 32°F (-10 to 0°C): ±2.0
      -22 to 14°F (-30 to -10°C): ±3.0
      Response Time (95%)<500 ms (95% of reading)
      Spectral Response8 to 14 microns
      Emissivity0.10 to 1.00
      Optical Resolution10:1 (calculated at 90% energy)
      Display Resolution0.2°F (0.1°C)
      Repeatability of Readings±0.8% of reading or <±2°F (1.0°C), whichever is greater
      PowerAA Battery
      Battery Life10 hours with laser and backlight on
      Operating Temperature32 to 122°F (0 to 50°C)
      Storage Temperature-4 to 140°F (-20 to 60°C), without battery
      Operating Humidity10% to 90% RH non-condensing at 86°F (30°C)
      Operating Altitude6561.7′ (2000 m) above mean sea level
      Storage Altitude39,370.08′ (12,000 m) above mean seal level
      Drop Test9.8′ (3 m)
      Dimensions6.88 x 3.34 x 2.95″ (175 x 85 x 75 mm)
      Weight0.56 lbs (255 g)
      IP RatingIP 54 per IEC 60529
      Vibration and ShockIEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
      EMCEN 61326-1:2006 EN 61326-2:2006
      Standards and Agency ApprovalCompliance: EN/IEC 61010-1: 2001
      Laser safety: FDA and EN 60825-1 Class II