Thiết bị kiểm tra điện Fluke T6-1000

Fluke T6-1000 Electrical Tester, 1000 V AC

    Fluke T6-1000 Electrical Tester, 1000 V AC

    • 1 to 1000 V ac or dc
    • 0.1 to 200 A ac
    • Resistance 1 Ω to 100 kΩ
    • Frequency measurement 45 to 66 Hz
    • Works with wires up to AWG 4/0 (120 mm2) with a 0.7″ (17.8 mm) jaw opening
    Hãng sản xuất:

      Fluke T6-1000 Electrical Tester, 1000 V AC

      Measure voltage up to 1000 V ac due to FieldSense technology, which easily and quickly takes measurements by sliding a conductor through the open fork. Additionally, without opening covers or removing wire nuts, on wires up to AWG 4/0 (120 mm2), carrying as much as 200 A which makes the jobs safer, faster and easier.

      Features

      • FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage
      • Simultaneous voltage and current display shows all power supply measurements at a glance for efficient troubleshooting
      • 1 to 1000 V ac or dc
      • 0.1 to 200 A ac
      • Resistance 1 Ω to 100 kΩ
      • Frequency measurement 45 to 66 Hz
      • Works with wires up to AWG 4/0 (120 mm2) with a 0.7″ (17.8 mm) jaw opening
      • Hold button temporarily freezes the reading for easy viewing
      • Easy to read display with backlight

      Why use this electrical tester?

      Electricians often work in boxes jammed with wires, where finding a safe metallic contact point can be a challenge. With this tester they can take measurements by sliding a single wire into the open fork.

      How FieldSense works

      FieldSense technology is truly a breakthrough in how voltage is measured. While other open fork testers detect a magnetic field to show ac current, FieldSense technology detects an electrical field. This field interacts with a reference signal created by the tester, creating a voltage value on the tester’s display.

      Tips: FieldSense technology

      Do not hold or touch wire you are testing during a measurement. Use the black probe to make the ground connection if:

      • Wearing gloves or insulated footwear
      • Standing on an insulated ladder
      • Additional ground contact is required for the application

      FieldSense measurement looks like this when probably grounded:

      • Display color turns green
      • Display shows a valid measurement >16 V rather than dashes or 0.0
      • Shows for measurement ≥30 V

      Applications

      • Commercial and light industry

      Specifications

      Fluke T6-1000 Specifications

      FieldSense AC Voltage True RMS
      Requires Test LeadsNo
      Range1000 V
      Resolution1 V
      Accuracy±(3% + 3 counts) 45 to 66 Hz
      FieldSense AC Current True RMS
      Requires Test LeadsNo
      Range200.0 A
      Resolution0.1 A
      Accuracy±(3% + 3 counts) 45 to 66 Hz
      FieldSense Frequency (Hz)
      Requires Test LeadsNo
      Range45 to 66 Hz
      Resolution1 Hz
      Accuracy±(1% + 2 counts)
      Volts AC True RMS
      Requires Test LeadsYes
      Range1000 V
      Resolution1 V
      Accuracy±(1.5% + 2 counts) 45 to 66 Hz
      Volts DC
      Requires Test LeadsYes
      Range1000 V
      Resolution1 V
      Accuracy±(1% + 2 counts)
      Resistance
      Requires Test LeadsYes
      Range1000 V
      2000 Ω
      20 kΩ
      100 kΩ
      Resolution1 V
      1 Ω
      0.01 kΩ
      0.1 kΩ
      Accuracy±(1% + 2 counts)
      Safety
      Range1000 V CAT III
      600 V CAT IV
      General Specifications
      CalibrationOne year calibration cycle
      Jaw Opening0.7″ (17.8 mm)
      Operating Temperature14 to 122°F (-10 to 50°C)
      Storage Temperature-22 to 140°F (-30 to 60°C)
      Operating Altitude6562′ (2000 m)
      Storage Altitude32,808′ (10,000 m)
      Relative Humidity0 to 90%, 41 to 86°F (5 to 30°C)
      0 to 75%, 86 to 104°F (30 to 40°C)
      0 to 45%, 104 to 122°F (40 to 50°C)
      Battery Type and Life2 x AA (IEC LR6)
      360 hours continuous
      Typical; 200 hours using FieldSense
      Temperature Coefficient0.1 x (specified accuracy) /°C for <18 or >28°C
      SafetyIEC/EN 61010-1: Pollution degree 2
      Electromagnetic EnvironmentIEC/EN 61326-1: Portable
      Dimensions2.4 x 10.2 x 1.7″ (61.1 x 259.3 x 43.8 mm)
      Weight0.78 lb (350 g)