Chưa có sản phẩm trong giỏ hàng.
Hioki 3390 power analyzer
Hioki 3390 power analyzer:
- Power capacity measurement with an error of just ± 0.04%
- Measuring range up to 200 kHz
- Perform high speed 50ms calculations
- Data retrieval application using wireless Bluetooth technology
- WLTP-compliant equipment – Universal inspection process for light vehicles worldwide
Hãng sản xuất: Hioki
The need for electrical equipment drives energy saving and green energy initiatives such as motors, inverters, solar panels, air conditioners, electric vehicles and air conditioners are increasing at a rate not seen before. For the R7D centers, for a 0.1% efficiency improvement, highly accurate and accurate large current measurements are now within reach. The new Hioki 3390 power analyzer delivers top-notch accuracy of ± 0.1% to aid in achieving maximum efficiency in all your devices.
The Hioki 3390 power analyzer is the best of all power analyzers that the user should own. The Hioki 3390 delivers fast – accurate – intense power analysis. Wide range of measurement applications from basic to complex inverter frequencies!
1.The ability to measure power capacity with an error of only ± 0.04%
The Hioki 3390 power analyzer is an extremely specialized measuring device. Accuracy in the ability to measure – check current, few product lines of the same type can be compared. The 3390 offers 4 basic measurement error input channels of just ± 0.04%. Ensure measurement parameters will be accurate and detailed.
Pull-through current sensors offer outstanding accuracy compared to traditional shunt resistors while still being able to recover against overheating to allow high current measurements
2.Measuring range up to 200 kHz with flat margins and wide measuring range
- Voltage measurement accuracy: DC (accuracy from 45 to 66 Hz is still the same as 3390)
- Operating current and power measurement accuracy: DC and 45 to 66Hz
- Power factor effect: 45 to 66Hz
Accuracy when pairing Model 3390 with AC / DC Current Sensor 9709 (500A) and measuring current fs in each range (45 to 66Hz). The Hioki 3390 power analyzer can also analyze many other common electrical components in the circuit:
Implementing types of measurement:
+ Single-phase power measurement: 1-phase 2-wire & 1-phase 3-wire
+ Three-phase power measurement: 3-phase 3-wire & 3phase 4-wire
+ 4 channels for voltage measurement – 4 channels for measuring current
+ Measure each channel independently
Các nhóm thông số đo được:
+ Maximum voltage, current, voltage / current
+ Active capacity, phase angle, frequency
+ Unproductive capacity, apparent capacity, power factor
+ kWh, efficiency, loss, voltage / current interference a
+ Measure noise, spectrum of voltage
+ Additional measurements: Torque, rotation angle, frequency, slip, motor output
+ Harmonic measurement:
+ ….
The Hioki 3390 performs a wide range of metrological functions with one compact – highly portable device. Bring convenience to users when conducting test work. The 3390 deserves to be the device of choice to fulfill all test and analysis requirements.
3. Make 50ms high speed calculations
The Hioki 3390 is an accurate, wide-range power analyzer for measuring electrical power from DC frequencies to drives, providing four input channels to support single-phase and three-phase inverter motor system measurements. .
The 3390 power analyzer also completely convinces users by the speed of performing the calculation results extremely fast and extremely accurate. Data update speed of device within 50ms. The analysis parameters of the system status will be calculated in the shortest time. Accelerate testing progress and consolidate reliability for electrical engineering technician-engineer conclusions.
4.Apps data retrieval by wireless Bluetooth technology
Hioki 3390 applied modern technology in data retrieval. All measured values will be sent to the Hioki data logger using technology on both Android and iOS operating systems. This helps users to access data easily and quickly. The comparison work, analyzing the measurement results will be more effective.
5.WLTP-compliant equipment – Universal inspection process for light vehicles worldwide.
Hioki 3390 functions synchronously multi-circuit measurement, simple power measurement with DC sensor clamps and ergonomic compact design. The Hioki 3390 power analyzer provides extremely accurate vehicle fuel loss measurement, meeting the “WLTP – Synchronous testing process for global light cars”. Assist working in high-temperature engine compartments still yields the most accurate measurements.
Product Features:
- Super precise model +/- 0.1% accuracy to meet today’s demanding needs
- Switch from one range to another and maintain the same +/- 0.1% accuracy across all ranges
- Accuracy guarantee period is extended by 6 months from basic Model 3390 (other functions remain the same)
- Advanced motor analysis function (electric angle measurement and vector control support)
- High-speed harmonic analysis (data refresh rate 50 ms)
- Drive noise analysis function (using FFT analysis technology)
- Drive power measurement with the convenience of clamp on sensor
Thông số kỹ thuật
– Measurement line type:
+ Single-phase 2-wire, single-phase 3-wire
+ Three-phase 3-wire, threephase 4-wire
+ Voltage 4 channels, Current 4 channels
+ Isolated between each channel
– Measurement items:
+ Voltage, Current, Voltage/current waveform peak
+ Active power, Phase angle, Frequency, Current integration
+ Reactive power, Apparent power, Power factor
+ Power integration, Efficiency, Loss, Voltage/current ripple factor
+ Noise measurement,RMS spectrum of voltage/current Harmonic measurement
+ RMS value, Content factor, Phase angle
+ Total distortion, Disequilibrium factor
+ Additional functions: Torque, Rotation, Frequency, Slip, or Motor output
– Harmonic measurement:
+ Input: 4 channels, Synchronization frequency range: 0.5 Hz to 5 kHz
+ Number of harmonic orders: Max. 100th order
– Noise measurement:
+ Number of channels: 1ch (select one channel from CH1 to CH4)
+ Maximum analysis frequency: 100k/50k/20k/10k/5k/2kHz
– Measurement range:
+ 15~1500V, 7 ranges
+ 400mA to 500A (20A/50A/200A/500A)
+ Power range: 6.0000 W to 2.2500 MW
+ Frequency: 0.5 Hz to 5 kHz
– Basic accuracy(45Hz to 66Hz):
+ Voltage: ±0.05 % rdg. ±0.05 % f.s
+ Current: ±0.05 % rdg. ±0.05 % f.s
+ Active power: ±0.05 % rdg. ±0.05 % f.s
– Synchronization frequency range: 0.5 Hz to 5 kHz
– Frequency band: DC, 0.5 Hz to 150 kHz
– Data update rate: 50ms
– Display refresh rate: 200ms
– Data save interval: OFF,50~500s, 1~30s,1~60min, 15 settings
– External interfaces:
+ LAN, USB (communication/ memory)
+ RS-232C, CF card, Synchronization control
– Power supply: 100~240V AC, 50/60Hz, 140VA max.
– Product Net Weight: 4.8 kg
– Product Size: 340*170*157mm
– Supplied accessories:
+ Instruction Manual for Model 3390 ×1
+ Instruction Manual for Model 3390-10 ×1
+ Measurement Guide ×1
+ Power cord ×1, USB cable ×1, D-sub connector ×1
+ Color label ×2
