Máy đo pin ắc quy Hioki BT3563
Máy kiểm tra ắc quy Hioki BT3544-01
Máy đo pin ắc quy Hioki BT3563
Máy kiểm tra ắc quy Hioki BT3544-01

Battery meter Hioki BT3563

Battery meter Hioki BT3563:

  • Measure high voltage batteries up to 300V (BT3563)
  • Check production line of high voltage battery and battery module
  • Large cell test (low resistance)
  • Computer interface control for efficient remote operation
  • External I / O interface, RS-232C & Printer (RS-232C)
Hãng sản xuất:

Battery meter Hioki BT3563

The Hioki BT3563 battery tester supports simultaneous high-speed measurement of internal resistance and battery voltage for ever-expanding production lines of increasingly large lithium-ion low-resistance batteries and other battery packs for high voltage applications. The BT3563 battery internal resistance meter can measure the voltage and resistance of battery modules, high voltage battery packs, fuel cell stacks and other large batteries up to 300V.

High Precision – High Resolution – Fast Response
High precision
Resistance: +/- 0.5% rdg. +/- 5 dgt.
Voltage: +/- 0.01% rdg. +/- 3 dgt.
High resolution
Resistance: 0.01 uΩ (range 300 mΩ)
Voltage: 10 uV (range 6 V)

Quick response

Resistance and voltage: Instantaneous measurement within 18ms

Rate resistance and voltage at the same time
Resistance and voltage can be evaluated simultaneously Hi / IN / Lo using independent comparators. Judgment results are provided on the display, beeper and external I / O. The display allows both results to be confirmed at a glance.

Comprehensive Judgment Results
External I / O provides both separate and combined outputs of resistance and voltage rating results, so aggregated results can be monitored.

Product Features:

  • Measure high voltage battery packs up to 300V
  • Production line testing of high voltage battery packs and battery modules
  • Large cell test (low resistance)
  • Select PC interface for fully remote operation
  • Note: The comparative threshold values depend on the manufacturer, battery type and capacity, and these must be user-set.

Package:

  • 1 – Instructions for use
  • 1 – Power cord

Parameter

Max. applied measurement voltage± 300 V DC rated input voltage
± 300 V DC Max. rated voltage to earth
Resistance measurement ranges3 mΩ (Max. display 3.1000 mΩ, resolution 0.1 μΩ) to 3000 Ω (Max. display 3100.0 Ω, resolution 100 mΩ), 7 ranges
Accuracy: 30 mΩ to 3000 Ω ranges, ± 0.5% rdg. ± 5 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)
3 mΩ range, ± 0.5% rdg. ± 10 dgt. (Add ± 30 dgt. for EX.FAST, or ± 10 dgt. for FAST, or ± 5 dgt. for MEDIUM)
Testing source frequency: 1 kHz ± 0.2 Hz, testing current: 100 mA (3 mΩ range) to 10 μA (3000 Ω range)
Open-circuit Voltage: 25 V peak (3/30 mΩ ranges), 7 V peak (300 mΩ range), 4 V peak (3 Ω to 3000 Ω ranges)
Voltage measurement ranges6 VDC (resolution 10 μV) to 300 VDC (resolution 1 mV), 3 ranges
Accuracy: ± 0.01% rdg. ± 3 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)
Display31000 full digits (resistance), 600000 full digits (voltage), LED
Sampling rateFour steps, 4 ms (Extra-FAST), 12 ms (FAST), 35 ms (Medium), 150 ms (Slow)
(Typ., sampling time depends on supply frequency settings and function.)
Measurement timeResponse time + sampling rate, approx. 10 ms for measurements
(Response time depends on reference values and the measurement object.)
Comparator functionsJudgment result: Hi/IN/Lo (resistance and voltage judged independently)
Setting: Upper and lower limit, Deviation (%) from reference value
Logical ANDed result: PASS/FAIL, calculates the logical AND of resistance and voltage judgment results.
Result display, beeper, or external I/O output, Open-collector (35 V, 50 mA DC max.)
Analog outputMeasured resistance (displayed value, from 0 to 3.1 V DC, -01 suffix models only)
InterfacesExternal I/O, RS-232C, Printer (RS-232C), GP-IB (-01 suffix models only)
Power supply100 to 240 VAC, 50/60 Hz, 30 VA max.
Dimensions and mass215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz)