Hioki 3288 Clamp Meter
- Rugged machine design withstands impact
- Capable of measuring AC and DC up to 1000A
- Measure resistance in the range of 419.9 Ω to 41.99 MΩ
- Battery use continuously for 2.5 days
- Large LCD screen, 4199.dgt display and smart self-brightness function
Hioki 3288 clamp meter is AC / DC power meter with measuring range up to 1000A with basic accuracy of 1.5%. True-RMS technology reduces noise, making measurements more accurate and faster. With its unique features, this device deserves to be a companion for electrical technicians.
The Hioki 3288 clamp meter is a measuring device dedicated to high voltage measurement requirements. Hioki 3288 meters can measure up to 1000A AC / DC, allowing users to maximize their application’s features for different testing needs.
Mục lục
1. Rugged machine design withstands impact
Hioki 3288 pliers are designed with a very modern design, extremely sturdy outer shell. The device has a drop-proof rating from 1 meter above the concrete floor. This indicator helps to demonstrate the Hioki 3288 compared with other devices of the same type. This contributes to increased bearing capacity and electrical insulation for the device. Through this feature, Hioki 3288 has completely convinced users by the sheer durability of the device.
2. Ability to measure current AC – DC up to 1000A
Hioki 3288 clamp meter is capable of measuring both AC / DC current with rated up to 1000A. Suitable for use in high-intensity measurements, the UPS battery is continually fast and accurate. Device accuracy within: ± 1.5% rdg. ± 5 dgt.
3. Measure resistance in the range of 419.9 Ω to 41.99 MΩ
Resistance measurement range with 6 scales, wide measuring range increases stability, allowing accuracy up to: ± 2% rdg. ± 4 dgt .. Automatic alarm at 50 Ω ± 40 Ω, the function to automatically save parameters after measurement and very power saving.
4.Pin use for 2.5 consecutive days
Using a lithium battery (CR2032) × 1, continuous use of 60 hours helps the measurement process not be interrupted or high error due to low battery. Ensuring that measuring results always keep the highest accuracy gives users peace of mind when performing power system testing.
5.Extremely wide jaw opening size
The 35mm aperture size supports the measurement of many different sized large load circuits to meet the maximum measurement needs of the user.
6.Large LCD screen, display 4199.dgt and smart self-lightening function
The large-sized LCD design makes it easy to check results, has screen lights and an automatic screen refresh rate of 2.5 times per second for extended measurements. Hioki 3288 makes the measurement process more convenient and fast than ever.
Parameter
| Voltage level | AC Current: Measuring range: 100/1000 A ~ ± 1.5% rdg. ± 5 dgt (10 Hz to 500 Hz, Average rectified); DC Current: Measuring range: 100 / 1000A ~ ± 1.5% rdg; AC voltage: Range 4,200 / 42.00 / 420.0 / 600 V ~ ± 2.3% DC voltage: Range 420.0 m / 4,200 / 42.00 / 420.0 / 600 V ~ ± 1.3%. |
| Jaw size | φ 35 mm |
| Resistor | 419.9 Ω to 41.99 MΩ, 6 ranges ~ Basic accuracy: ± 2.0% rdg. ± 4 dgt. |
| Display | LCD |
| Electrical safety standards | CAT IV 600V |
| Sampling time | 2.5 seconds / time |
| Automatic feature | Auto alarm reaches 50 ± 40Ω, AUTO OFF AFTER 10 minutes of inactivity, Auto zero (DC A) |
| The battery | CR2032 x 1, Up to 60 hours uptime |
| Screen refresh rate | 400 ms |
| Accessories included | Included accessories: User manual × 1, Probe: L9208 × 1, Protective bag: 9398 × 1 |
