Hioki 3290-10 clamp meter

Hioki 3290-10 clamp meter

The Hioki 3290-10 clamp meter is a specialized measuring device in the electrical industry. Modern compact design, sensor using Hioki advanced technology for more accurate measurement results.

The Hioki 3290-10 meter has many features such as: measuring the amperage of voltages AC, DC (Electric current across a surface is defined as the amount of charge that moves through that surface in a unit of time. space)

HIOKI 3290-10 AC / DC clamp meter measures the current flowing in the wire according to the principle of magnetic induction measured by the current.

and clamp meter also integrates many other features of a basic electric meter

Measure ac voltage (alternating voltage), dc (direct voltage)

Resistance measurement

– Measure diodes

Measure continuity

– Measure voltage frequency

Voltage detection function (This function helps users to check equipment and wiring without having to measure directly, this function is almost a bit of non-contact electrical test)

High-end models or need high accuracy measurements are integrated TRUE RMS (RMS = Root mean square, is the square root of the average of the squares used)

Product Features:

• Choice of three sensors (Sold separately) Measures rated current up to 100 A, 200 A or 2000 A
• Equal polarization function measures the battery charge and discharge level with a device (positive, negative, and total integral values)
• Function that displays the running time / Ratio of the load operation status
• Function that displays the specific maximum current according to the peak discharge current and battery charge
• The time-limited average display function shows an average value for a specific integration time
• External DC Power capability allows long-term measurements under battery power
• A clamp AC / DC sensor must be purchased separately

Technical parameters:

Measurement type: DC, AC & DC (True RMS); AC (True RMS / Average Value)

Peak value: Absolute value (of the waveform peak)

Separate AC from DC output: Separate components of AC, DC

Output (terminal 1): R.m.s value current waveform (2 V setting / range setting), frequency value (1 VDC / range setting)

Output (terminal 2): ​​Effective current / Low battery indicator output

Integral current measurement: ±, +, – true present value, mean

Track measurement progress: Uptime, total number of measurements

Timer setting: 99 hours 59 minutes. (can be repeated up to 20 times)

Save data: Peak, real value, uptime or other parameters

Frequency measurement range: 1.00Hz to 1000Hz, Basic accuracy: ± 0.3% rdg. ± 1dgt.

Peak factor:> 2.5, or range of the peak value of the probe

Frequency characteristic: DC, or 1 Hz to 1 kHz

According to good yield: Based on measuring head

Other functions: Change response time, filter (fc = 550 Hz)

Power source: LR6 (AA) alkaline battery × 4, continuous use for 22 hours or AC adapter 9445-02 / -03 (3290-10 models only)

Dimensions, mass: 155 mm W × 98 mm H × 47 mm D, 545 g

Accessories included: Strap × 1, alkaline battery LR6 (AA) × 4

The AC / DC clamp meter will average the squared of the instantaneous values ​​of the quantity measured over a period of time> Get the square root of this value for “True RMS