Phase indicator Hioki PD3259
Phase indicator Hioki PD3259:
- Pioneering phase indicator device using inductive voltage measuring clamp
- Non-metallic voltage clamp design ensures absolute insulation
- Check the phase order and simultaneously measure the voltage between the phases
- LCD screen design – backlit for effective viewing
- Duration of continuous operation for 5 hours
The Hioki PD3259 is a pioneering voltage measuring clamp on the market today. The device possesses outstanding technology from Japan, bringing accurate and safe measurement results to use. The Hioki PD3259 is an effective device for requirements for phase sequence testing and voltage measurement between phases in power systems in factories, buildings, etc.
The PD3259 phase detector lets you measure three-phase voltages and detect phase sequence simultaneously just by cutting into shielded cables, ensuring absolutely no contact with metal parts for maximum safety .
1. Pioneering phase indicator device using inductive voltage measuring clamp
In a three-phase electrical system, reversed phase-chain can have serious consequences. From damaging machinery to danger more than damaging their lives. Therefore, checking phase order in power systems is extremely important.
The PD3259 phase indicator is a product that comes with all the features to support that work. PD3259 is also the pioneer device on the market using inductive voltage measuring clamps. The device has a quick response time of only 3 seconds or less. Device display update rate 500ms. With this feature, users will get accurate measurement results in the fastest time.
2. Non-metallic voltage clamp design ensures absolute insulation
The PD3259 phase indicator has a voltage clamp design made of non-metallic material. This material helps the device ensure absolute insulation. This feature helps to bring safety to users when using. With this device users can rest assured with the most accurate and safest measurement results!
3. Check the phase order and simultaneously measure the voltage between the phases
The device allows simultaneous phase order check and voltage measurement between phases. This will help users shorten the time and save costs. By simply using the Hioki PD3259 phase indicator they were able to perform both tests at the same time. The device helps users to optimize phase order checking and voltage measurement between phases.
4. LCD screen design – backlit for effective viewing
5. Hioki PD3259 has 5 hours of continuous operation time
The machine is powered by 4 AA alkaline batteries (LR6) to maintain continuous operation for 5 hours. Minimize interruptions during phase-sequence verification, ensuring measurement results are always accurate and reliable. Using PD3259 contributes to improve efficiency for phase-order checking.
With the outstanding features just mentioned above, the PD3259 phase indicator meter from Hioki brand – Japan will be the perfect choice that users should not miss.
Parameter
| Detection functions | Positive phase, negative phase (Three-phase 3-wire, Three-phase 4-wire), open phase, prediction of ground phase (Three-phase 3-wire) |
|---|---|
| Measurement parameters | Three-phase AC voltage (line-to-line voltage and voltage to ground), Frequency • Voltage measurement accuracy: ±2.0% rdg. ±8 dgt., • Frequency measurement accuracy: ±0.5% rdg. ±1 dgt., • Response time: 3 s or less, Display update rate: 500 ms |
| Measurement targets | Covered cables, Metal portions *Use on shielded cables not supported Three-phase 90.0 to 520.0 V AC (45 to 66 Hz) |
| Diameter of measurable conductors | Finished outer diameter: 6 to 30 mm (0.24 to 1.18 in) |
| Maximum rated voltage to earth | 600 V AC (CAT IV) |
| Environmental protection | Main unit (excluding voltage sensors): IP54 (EN60529) dustproof and waterproof |
| Other functions | Hold function, Backlight, Buzzer, Auto power-off, Low battery warning, Drop proof (on concrete, 1 m/ 1 time) |
| Power supply | AA alkaline batteries (LR6) ×4, Maximum rated power: 3 VA, Continuous operating time: 5 hours (Backlight off, standby state, Without Z3210) |
| Dimensions and mass | 84 mm (3.31 in)W × 146 mm (5.75 in)H × 46 mm (1.81 in)D, 590 g (20.8 oz, including batteries), cord length: 0.5 m (1.64 ft) |
| Accessories | AA alkaline batteries (LR6) ×4, Instruction manual ×1, Carrying case C0203 ×1, Color clip (White ×2, red ×2, blue ×2, yellow ×2), Spiral tubes (black ×1) |
