Đồng hồ vạn năng Fluke 3000 FC

Fluke 3000 FC Industrial System

    The Fluke 3000 FC Industrial System provides measurement of all common electrical parameters

    The Fluke 3000 FC Series Wireless Multimeter with the Fluke Connect® app has all the essentials for convenient test and measurement troubleshooting:

    • AC and DC voltage measurements to 1000 V
    • AC and DC current with 0.01 mA resolution
    • Continuity, resistance, diode test, capacitance and frequency measurements
    • MIN/MAX recording
    • CAT III 1000 V, Cat IV 600 V; IP54
    Hãng sản xuất:

      Fluke 3000 FC Industrial System

      The Fluke 3000FC Wireless True-RMS Digital Multimeter with Fluke Connect Compatibility provides all the facts right in the field. With its precision, reliability, and ease of use, the Fluke 3000 FC Wireless Multimeter has all the essential electrical and electronic troubleshooting features professional technicians need. It gives you true-RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging, plus a frequency, capacitance, resistance, continuity and diode measurements.

      Reduces Arc Flash Risk

      Independently tested for safe use in CAT IV 600V/CAT III 1000 V environments, the Fluke 3000 FC DMM and Fluke Connect wireless modules put tools, not your body, near live electrical panels. Just de-energize the cabinet; open the panel while wearing PPE; and connect the remote modules—voltage modules, current clamps, flexible current loops or thermometers. Then read the results on the 3000 FC from a safe distance up to away. You can view the meter measurement, plus readings from up to three wireless modules all on the same screen. And by separating yourself from hazardous measurement situations you’ll reduce the risk of arc flash.

      De-energize the cabinet, connect the remote modules, close the cabinet and reenergize. The FC Wireless Industrial System displays the readings wirelessly on the 3000 FC Wireless Digital Multimeter.

      Connect the three FC Wireless iFlex AC Current Module to your test points, and view the results from all three phases in 1/3 the time and cost of current test methods or connect the FC Wireless AC Voltage Module and view both voltage and current measurements simultaneously. You’ll get better answers, faster, and spend less time in full PPE.

      From short distances, you can even view readings from modules through closed electrical panels. Plus the Fluke Connect® remote modules capture up to 65,000 sets of time stamped min/max/avg readings, using the optional PC adapter. Fluke Connect wireless test tools also offer increased safety by letting you view readings in a separate location from the test point.

      Now you can take readings on moving machinery, with only the measurement module in harm’s way.

      Features:

      The Fluke 3000 FC Industrial System provides measurement of all common electrical parameters

      The Fluke 3000 FC Series Wireless Multimeter with the Fluke Connect® app has all the essentials for convenient test and measurement troubleshooting:

      • AC and DC voltage measurements to 1000 V
      • AC and DC current with 0.01 mA resolution
      • Continuity, resistance, diode test, capacitance and frequency measurements
      • MIN/MAX recording
      • CAT III 1000 V, Cat IV 600 V; IP54

      The Fluke v3000 FC Wireless AC Voltage Module offers:

      • Measurements up to 1000 V true-RMS AC
      • Use as a standalone meter or as part of the system
      • A logging function for recording and saving up to 65,000 readings

      The Fluke a3001 FC Wireless iFlex® AC Current Module allow you to measure around awkward sized conductors or get into tight spaces and makes wire access easier:

      • Measure up to 2500 A AC
      • Use as a standalone meter or as part of the system
      • Logging function for recording and saving up to 65,000 readings
      • Inrush function

      Specifications

      Specifications: Fluke 3000 FC Industrial System

      Fluke 3000 FC Series Wireless Multimeter

      * For all specifications: accuracy is specified for one year after calibration, at operating temperatures of 18°C to 28°C, with relative humidity at 0% to 90%. Accuracy specifications take the form of ±([% of Reading] + [Number of least significant digits]).

      Detailed Specifications
      AC Voltage
      Range ¹ / Resolution600.0 mV / 0.1 mV
      6.000 V / 0.001 V
      60.00 V / 0.01 V
      600.0 V / 0.1 V
      1000 V / 1 V
      Accuracy 2 3 445 Hz to 500 Hz1.0% + 3
      500 Hz to 1 kHz2.0% + 3
      1. All AC voltage ranges are specified from 1% of range to 100% of range.
      2. Crest factor of ≤ 3 at full scale up to 500 V, decreasing linearly to crest factor < 1.5 at 1000 V.
      3. For non-sinusoidial waveforms, add ±(2% of reading + 2% full scale) typical, for crest factor up to 3.
      4. Do not exceed 107 V-Hz.
      DC Voltage, Continuity, Resistance, Diode Test and Capacitance
      Function
      mVRange / Resolution600.0 mV / 0.1 mV
      Accuracy0.09% + 2
      VRange / Resolution6.000 V / 0.001 V
      60.00 V / 0.01 V
      600.0 V / 0.1 V
      1000 V / 1 V
      Accuracy0.09% + 2
      0.15% + 2
      )))Range / Resolution600 Ω / 1 Ω
      AccuracyMeter beeps at < 25 Ω, beeper detects opens or shorts of 250 μs or longer.
      ΩRange / Resolution600.0 Ω / 0.1 Ω
      6.000 kΩ / 0.001 kΩ
      60.00 kΩ / 0.01 kΩ
      60.00 kΩ / 0.1 kΩ
      600.0 kΩ / 0.001 MΩ
      50.00 MΩ / 0.01 MΩ
      Accuracy0.5% + 2
      0.5% + 1
      1.5% + 3
      Diode testRange / Resolution2.000 V / 0.001 V
      Accuracy1% + 2
      µFRange / Resolution1000 nF / 1 nF
      10.00 μF / 0.01 μF
      100.0 μF / 0.1 μF
      9999 μF1 / 1 μF
      Accuracy1.2% + 2
      10% typical
      1. In the 9999 μF range for measurements to 1000 μF, the measurement accuracy is 1.2% + 2.
      AC and DC Current
      Function
      mA AC
      (45 Hz to 1 kHz)      		Range 1 / Resolution60.00 mA / 0.01 mA
      400.0 mA 3/ 0.1 mA
      Accuracy1.5% + 3
      mA DC 2Range 1 / Resolution60.00 mA / 0.01 mA
      400.0 mA 3/ 0.1 mA
      Accuracy0.5% + 3
      1. All AC current ranges are specified from 5% of range to 100% of range.
      2. Input burden voltage (typical): 400 mA input 2 mV/mA.
      3. 400.0 mA accuracy specified up to 600 mA overload.
      Frequency
      Range / Resolution99.99 Hz / 0.01 Hz
      999.9 Hz / 0.1 Hz
      9.999 kHz / 0.001 kHz
      99.99 kHz / 0.01 kHz
      Accuracy 10.1% + 1
      1 Frequency is specified up to 99.99 kHz in volts and up to 10 kHz in amps.
      Input Characteristics
      FunctionOverload
      protection      		Input impedance
      (nominal)      		Common mode rejection ratio (1 kΩ unbalance)Normal mode rejection
      1100 Vrms> 10 MΩ < 100 pF> 120 dB at DC, 50 Hz or 60 Hz> 60 dB at 50 Hz or 60 Hz
      1100 Vrms> 10 MΩ < 100 pF> 60 dB, DC to 60 Hz> 60 dB at 50 Hz or 60 Hz
      1100 Vrms> 10 MΩ < 100 pF> 120 dB at DC, 50 Hz or 60 Hz> 60 dB at 50 Hz or 60 Hz
      Open circuit test voltageFull scale voltageTypical short circuit current
      To 6 MΩ50 MΩTypical short circuit current
      1100 Vrms< 2.7 VDC< 0.7 VDC< 0.9 VDC< 350 mA
      1100 Vrms< 2.7 VDC2.000 VDC< 1.1 mA
      mA Function
      Overload protectionFused, 44/100 A, 1000 V FAST Fuse
      Overload600 mA overload for 2 minutes maximum, 10 minutes rest minimum
      MIN/MAX Recording Accuracy
      DC functionsThe specified accuracy of the measurement function ±12 counts for changes > 350 mS in duration.
      AC functionsThe specified accuracy of the measurement function ±40 counts for changes > 900 mS in duration.
      General Specifications
      Maximum voltage between any terminal and earth ground1000 VDC or AC rms
      Ω fuse protection from A inputs0.44 A (44/100 A, 440 mA), 1000 V FAST Fuse, Fluke specified part only
      Display (LCD)Update rate4/sec
      Volts, amps, ohms6000 counts
      Frequency10,000 counts
      Capacitance1,000 counts
      Battery typeThree AA Alkaline batteries, NEDA 15A IEC LR6
      Battery life250 hours minimum
      RF communications2.4 GHZ ISM Band
      RF communication rangeOpen air, unobstructedUp to 20 m
      Obstructed, sheetrock wallUp to 6.5 m
      Obstructed, concrete wall, or steel electrical enclosureUp to 3.5 m
      TemperatureOperating-10°C to 50°C
      Storage-40°C to 60°C
      Temperature coefficient0.1 x (specified accuracy) / °C (< 18°C or > 28°C)
      Relative humidity0% to 90% (0°C to 35°C)
      0% to 75% (35°C to 40°C)
      0% to 45% (40°C to 50°C)
      AltitudeOperating2,000 m
      Storage12,000 m
      Electromagnetic compatibility
      EMI, RFI, EMC, RF      		EN 61326-1:2006, EN 61326-2-2:2006
      ETSI EN 300 328 V1.7.1:2006, ETSI EN 300 489
      V1.8.1:2008,
      FCC Part 15 Subpart C Sections 15.207, 15.209, 15.249
      FCCID : FCC: T68-FDMMBLE IC: 6627A-FDMMBLE
      Safety complianceANSI/ISA 61010-1 / (82.02.01): 3rd edition
      CAN/CSA-C22.2 No 61010-1-12: 3rd edition
      UL 61010-1: 3rd edition
      IEC/EN 61010-1:2010
      CertificationsCSA, FCC, CE
      Ingress Protection (IP) ratingIP54
      Pollution Degree2
      Size (H x W x L)4.75 x 9.3 x 20.7 cm (1.87 x 3.68 x 8.14 in)
      Weight340 g (12 oz)
      WarrantyThree years
      Not compatible with Fluke CNX test tools

      Fluke a3001 FC Wireless iFlex® AC Current Module

      Specifications
      Range0.5 A to 2500 A AC
      Resolution0.1 A
      Accuracy3% ±5 digits (5 Hz to 500 Hz)
      Crest factor (50 Hz/60 Hz)3.0 at 1100 A
      2.5 at 1400 A
      1.42 at 2500 A
      add 2% for C.F. > 2
      LCD w/ backlight3½ digits
      Log rate/interval1 sec minimum/adjustable by PC or front panel
      Battery type2 AA, NEDA 15 A, IEC LR6
      Battery life400 hours
      MemoryRecord up to 65,000 readings
      RF communications2.4 GHZ ISM Band
      RF communication rangeOpen air, unobstructedUp to 20 m
      Obstructed, sheetrock wallUp to 6.5 m
      Obstructed, concrete wall or steel electrical enclosureUp to 3.5 m
      Operating temperature-10°C to +50°C
      Storage temperature-40°C to +60°C
      Temperature coefficientAdd 0.1 x (specified accuracy) / °C (< 18°C or > 28°C)
      Operating humidity90% at 35°C
      75% at 40°C
      45% at 50°C
      AltitudeOperating2,000 m
      Storage12,000 m
      EMCEN 61326-1:2006
      Safety complianceIEC 61010-1, 600 V CAT IV/1000 V CAT III, 3rd edition
      Safety ratingCAT IV 600 V, CAT III 1000 V
      CertificationsCSA, CE, FCC: T68-FBLE IC: 6627A-FBLE
      Ingress Protection (IP) ratingIP42
      Pollution Degree2
      Jaw opening25.4 cm (10 in) coil
      Size (H x W x D)16.5 x 6.35 x 1.4 cm (6.5 x 2.5 x 1.4 in)
      Weight.22 kg (8 oz)
      WarrantyThree years
      Not compatible with Fluke CNX test tools

      Fluke v3000 FC Wireless AC Voltage Module

      Accuracy is specified as ±([% of reading] + [number of least significant digits]). All ranges are autoranging. Accuracy is specified from 5% to 100% of the range obtained by autoranging, from 18°C to 28°C.

      Specifications
      Range ¹ / Resolution6.000 V / 0.001 V
      60.00 V / 0.01 V
      600.0 V / 0.1 V
      1000 V / 1 V
      Accuracy 2 3 445 Hz to 500 Hz1.0% + 3
      500 Hz to 1 kHz2.0% + 3
      1. All AC voltage ranges are specified from 1% of range to 100% of range.
      2. Crest factor of ≤ 3 at full scale up to 500 V, decreasing linearly to crest factor < 1.5 at 1000 V.
      3. For non-sinusoidial waveforms, add ±(2% of reading + 2% full scale) typical, for crest factor up to 3.
      4. Do not exceed 107 V-Hz.
      General Specifications
      LCD w/ backlight3½ digits, 6000 counts, updates 4/sec
      Battery type2 AA, NEDA 15 A, IEC LR6
      Battery life400 Hours
      MemoryRecord up to 65000 readings
      RF communications2.4 GHZ ISM Band
      RF communication rangeOpen air, unobstructedUp to 20 m
      Obstructed, sheetrock wallUp to 6.5 m
      Obstructed, concrete wall or steel electrical enclosureUp to 3.5 m
      Operating temperature-10°C to +50°C
      Storage temperature-40°C to +60°C
      Temperature coefficient0.1 x (specified accuracy)/ °C (< 18°C or > 28°C)
      Operating humidity90% at 35°C, 45% at 40°C, 45% at 50°C
      AltitudeOperating2,000 m
      Storage12,000 m
      EMCEN 61326-1:2006
      Safety complianceANSI/ISA 61010-1 / (82.02.01)3rd edition
      CAN/CSA-C22.2 No 61010-1-123rd edition
      UL 61010-13rd edition
      IEC/EN 61010-12010
      Safety ratingCAT IV 600 V, CAT III 1000 V
      CertificationsCSA, CE, FCC: T68-FBLE IC: 6627A-FBLE
      Ingress Protection (IP) ratingIP42
      Pollution Degree2
      Size (H x W x D)16.5 x 6.35 x 1.4 cm (6.5 x 2.5 x 1.4 in)
      Weight.22 kg (8 oz)