FLUKE 368 Clamp Meter (AC 60A; True RM)

The Fluke 368 true-rms leakage current clamp meter helps users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment off line.

The Fluke 368 has a large 40 mm diameter jaw for work with large conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.

Key features

True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
40 mm jaw opening
Highest resolution of 1 μA, measure up to 60 A
Selectable filter function removes unwanted noise
Max/Min/Average readings and hold function
Forward-facing LED worklight for use in dark wiring cabinets
Backlit display; auto backlight off and auto power off for extended battery life
CAT III 600V safety rating

For more details about this product, download Fluke 368 Datasheet

Features:

– Range (AC): 3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A
3 mA/30 mA/300 mA : automatic selection
3 A/30 A/60 A : automatic selection
– Resolution :
3 mA / 0.001 mA
30 mA / 0.01 mA
300 mA / 0.1 mA
3 A / 0.001 A
30 A / 0.01 A
60 A / 0.1 A
– Accuracy :
3 mA – 30 A : 1% + 5 digits
60 A : 2% + 5 digits
– Frequency : 40 Hz to 1 kHz
– Display (LCD) : 3300 count
– Maximum conductor diameter : 40 mm
– Battery : 2 AA, IEC LR6, NEDA 15A, alkaline
– Battery life : Expected battery life, without using backlight and spotlight, is more than 150 hours
– Operating temperature : -10 °C to +50 °C
– Storage temperature : -40 °C to +60 °C
– Dimensions : 101 mm (w) x 234 mm (h) x 46 mm (d)
– Weight : 500 g
Standard accessories : Main unit, Soft case, Safety manual, Batteries 2 AA,

Specifications

Electrical Specifications
Measurement function	Alternating current
AC ampere range	3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A
Range selection	mA / A: manual selection 3 mA / 30 mA / 300 mA: automatic selection 3 A / 30 A / 60 A: automatic selection
Range / Resolution	3 mA¹ / 0.001 mA
	30 mA / 0.01 mA
	300 mA / 0.1 mA
	3 A / 0.001 A
	30 A / 0.01 A
	60 A / 0.1 A
Accuracy – filter activated (40 to 70 Hz), filter off (40 to 1 kHz)²	3 mA – 30 A 60 A	1% + 5 digits 2% + 5 digits
Frequency	40 Hz to 1 kHz
Crest Factor	3
After calibration accuracy is valid for one year. Accuracy is expressed as ± (% of reading + digits). Reference conditions 23 ±5 °C and a maximum relative humidity of 80%. ¹The minimum value is 10 μA rms. ²Outside of the TC / °C 18 °C to 28 °C, 0.02 + 1

Safety and Environmental Specifications
General safety	IEC 61010-1: Pollution Degree 2
Measurement safety	IEC 61010-2-032: CAT III 600 V / CAT IV 300 V
Operating temperature	-10 °C to +50 °C
Storage temperature	-40 °C to +60 °C
Operating humidity	Non-condensing (<10 °C)
	90% relative humidity (10 °C to 30 °C)
	75% relative humidity (30 °C to 40 °C)
	45% relative humidity (40 °C to 50 °C)
Protection class	IEC 60529: IP30 (jaw closed)
Operating altitude	2000 m
Storage altitude	12000 m
Current sensor action category	IEC 61557-13: Class 2, ≤30 A / m

FLUKE 368 Clamp Meter (AC 60A; True RM)