Ampe kìm Fluke 369 FC (đo dòng rò rỉ)

Fluke 369 FC Current Clamp Meter

Fluke 369 FC Current Clamp Meter

  • True-rms measurements
  • 3mA, 30mA, 300mA, 3A, 30A, & 60A AC ranges
  • 1.5% +5 digits (3mA-30A), 2% +5 digits (60A)
  • 40Hz to 1kHz frequency
Hãng sản xuất:

Fluke 369 FC Current Clamp Meter

he Fluke 369 FC current clamp meter is designed to detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, without taking equipment off line.

It has a large diameter jaw (61mm) for work with larger conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.

The 369 FC also offer wireless data connectivity via Fluke Connect which allows you to track changes in leakage current over time, helping to identify potential problems before they turn into major failures.

Reduce downtime – find leakage currents without taking equipment offline

This True RMS leakage current clamp meter helps users detect, document, record, and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment offline.

It features a large 2.4″ (61 mm) diameter jaw for work with large conductors. The jaw is fully shielded to capture very small leakage signals and minimize external electromagnetic interference.

Also, this product offers wireless data connectivity via Fluke Connect, which enables you to track changes in leakage current over time, helping you to identify potential problems before they turn into major failures.

Features

  • True-rms measurements
  • 3mA, 30mA, 300mA, 3A, 30A, & 60A AC ranges
  • 1.5% +5 digits (3mA-30A), 2% +5 digits (60A)
  • 40Hz to 1kHz frequency
  • Forward-facing LED worklight
  • 14 to 122°F (-10 to 50°C) operating temp
  • CAT III 600V safety rating
  • True RMS measurements for accuracy when measuring complex, non-sinusoidal waveforms
  • 2.4″ (61 mm) jaw opening
  • Highest resolution of 1 µA, measure up to 60 A
  • Selectable filter function removes unwanted noise
  • Max/Min/Average readings and hold function
  • Forward-facing LED work light for use in dark wiring cabinets
  • Backlit display; auto backlight off and auto power off for extended battery life
  • Internal Memory Logging: up to 65,000 measurement points
  • CAT III 600 V safety rating

What’s in the Box

  • Soft case
  • Manual
  • 2 AA batteries

Specifications

Fluke 369 FC Specifications

Electrical Specifications
Measurement FunctionAlternating current
AC Ampere Range3, 30, 300 mA
3, 30, 60 A
Range SelectionmA/A: Manual selection
3/30/300 mA: Automatic selection
3/30/60 A: Automatic selection
Range/Resolution3/0.001 mA
30/0.01 mA
300/0.1 mA
3/0.001 A
30/0.01 A
60/0.1 A
Accuracy – Filter Activated (40 to 70 Hz), Filter Off (40 to 1 kHz)3 mA to 30 A: 1% + 5 digits
60 A: 2% + 5 digits
Frequency40 Hz to 1 kHz
Crest Factor3
General Specifications
Display (LCD)Digital readout: 3300 count
Display Refresh Rate4 times/sec
Maximum Conductor Diameter2.4″ (61 mm)
Battery2 x AA, IEC LR6, NEDA 15A, alkaline
Battery LifeExpected battery life, without using backlight and spotlight, is more than 150 hours
Automatic Shut-DownMeter automatically shuts down after 15 minutes of inactivity
Operating Temperature14 to 122°F (-10 to 50°C)
Storage Temperature-40 to 140°F (-40 to 60°C)
Operating HumidityNon-condensing at <50°F (<10°C)
90% relative humidity at 50 to 86°F (10 to 30°C)
75% relative humidity at 86 to 104°F (30 to 40°C)
45% relative humidity at 104 to 122°F (40 to 50°C)
Operating Altitude6561.7′ (2000 m)
Storage Altitude39,370.1′ (12,000 m)
Dimensions10.1 x 4.6 x 1.8″ (257 x 116 x 46 mm)
Weight1.3 lbs (600 g)
Safety Specifications
General SafetyIEC 61010-1: Pollution Degree 2
Measurement SafetyIEC 61010-2-032: CAT III 600 V/CAT IV 300 V
Current Sensor Action CategoryIEC 61557-13: Class 2, ≤30 A/m