FLUKE 771 Process Clamp Meter (100mA)
The Fluke 771 mA clamp meter is designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
- Best in class 0.2 % accuracy
- 0.01 mA resolution and sensitivity
- Measure 4 to 20 mA signals without ”breaking the loop”
- Measure mA signals for PLC and control system analog I/O
- Dual backlit display with both mA measurement and percent of 4 to 20 mA span
- Measurement Spotlight illuminates hard to see wires in dark enclosures
- Detachable clamp with extension cable for measurements in tight locations
- Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
- Automatically change the 4 to 20 mA output for remote testing
- Power saving features, auto-off, backlight timeout extend battery life
- Hold function captures and displays changing measurements
- mA: 0 to 20.99 mA /0.2% +2 counts
- 21.0 mA to 100.0 mA / 1% + 5 counts
- Diameter conductor: 0.177” or 4.5 mm max
- IP Rating:IP 40
- Size:59 x 38 x 212 mm, (2.32 x 1.5 x 8.35 in.)
- Weight: 260G, (9.1 oz.)
- Included: Soft Carrying Case, Users Manual
Applications
- Petro-Chemical
- Oil and Gas
- Food and Beverage
- Pharmaceutical
Thông số kỹ thuật của đồng hồ Fluke 771:
Diameter of measurable conductor | 0.177” or 4.5 mm max |
Operating temperature | -10 to 50 ºC |
Storage Temperature | -25 to 60ºC |
Operating Humidity | < 90% @ <30 ºC, < 75% @ 30 to 55ºC |
Operating Altitude | 0 to 2000 m |
IP Rating | IP 40 |
Size | 59 x 38 x 212 mm, (2.32 x 1.5 x 8.35 in.) |
Weight | 260G, (9.1 oz.) |
Vibration | Random 2 g, 5 to 500 Hz |
Shock | 1 meter drop test (except the jaw) |
EMI/RFI | Meets EN61326-1 Note: For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m. |
Temperature Coefficient | 0.01% ºC (<18? or > 28?) |
Power, battery life | (2) AA 1.5 V Alkaline, IEC LR6, 40 hours typical |
Warranty | Three years for electronics one year for cable and clamp assembly |
mA measurement (Measured by clamp) | Resolution and Range: 0 to 20.99 mA Accuracy: 0.2% +2 counts Resolution and Range: 21.0 mA to 100.0 mA Accuracy: 1% + 5 counts |