Fluke 805 Vibration Meter
Fluke 805 Vibration Meter
- Reliable, repeatable, accurate device for checking bearings and overall vibration
- Features innovative sensor design that minimizes measurement variations caused by device angle or contact pressure
- Provides consistent data quality at both low and high frequency ranges
- Offers four-level severity scale to assess urgency of problems and bearing condition
Fluke 805 Vibration Meter
Make go or no-go maintenance decisions with confidence. The Fluke 805 Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.
What Makes the 805 the Best Choice?
- A meter – not a pen – that measures overall vibration as well as specific variables like bearing condition and temperature, to provide a more complete picture
- A combination vibration and force sensor tip that compensates for user variance (force or angle) yielding accurate, repeatable readings
- A four-level severity scale and onboard processor calculate bearing condition and overall vibration using easy-to-understand textual alerts (Good, Satisfactory, Unsatisfactory, Unacceptable)
- Sensor sensitivity can read a wide range of frequencies (10 to 1,000 Hz and 4,000 to 20,000 Hz) covering most machine and component types
- Straight-forward user interface that minimizes the user inputs to RPM range and equipment type
Other useful features:
- Measures overall vibration (10 Hz to 1,000 Hz) for acceleration, velocity, and displacement units of measurement for a wide variety of machines
- Provides Crest Factor+ technology for reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
- Compares vibration levels with ISO-10816 severity scales
- Allows you to view trending in Microsoft® Excel using pre-built templates
- Features colored lighting system (green, red) and on-screen comments to indicate how much pressure needs to be applied to take measurements
- Measures temperature with Spot IR Sensor to increase diagnostic capabilities
- Holds and saves up to 3,500 measurements in on-board memory
- Provides external accelerometer support for hard to reach locations
- Allows you to export data via USB
- Provides audio output for listening to bearing tones directly
- Features built-in flashlight for viewing measurement locations in dark areas
- Provides large high-resolution display for easy navigation and viewing
Specifications
Vibration Meter:
Low frequency range: 10 Hz to 1,000 Hz
High frequency range: 4,000 Hz to 20,000 Hz
Severity levels: Good, Satisfactory, Unsatisfactory, Unacceptable
Vibration limit: 50 g peak (100 g peak-peak)
Signal to noise ratio 80 dB
Sampling rate:
Low frequency: 20,000 Hz
High frequency: 80,000 Hz
Real time clock backup: Coin battery
Sensor:
Sensitivity:100 mV g ± 10%
Measurement range:0.01 g to 50 g
Low frequency range (overall measurement): 10 Hz to 1,000 Hz
High frequency range: 4,000 Hz to 20,000 Hz
Resolution: 0.01 g
Accuracy: At 100 Hz ± 5% of measured value
Amplitude Units:
Acceleration: g, m/sec²
Velocity: in/sec, mm/sec
Displacement: mils, mm
Infrared Thermometer (Temperature Measurement)
Range: -20 °C to 200 °C
Accuracy: ±2 °C (4 °F)
Focal length: Fixed, at ~3.8 cm (1.5″)
Firmware
External interfaces: USB 2.0 (full speed) communication
Data capacity: Database on internal flash memory
Upgrade: Through USB
Memory: Up to 3,500 measurements
IP rating: IP54
Vibration limit: 500g peak
Drop test: 1 meter
Battery: AA (2)Lithium Iron Disulfide
Battery life: 250 measurements
Size: 24.1 cm x 7.1 cm x 5.8 cm
Weight: 0.40 kg
Included accessories: USB cable, Storage case, Belt holster, Quick reference guide, CD-ROM (includes MS Excel template and documentation), Two (2) AA batteries
